[wxqc] Unable to communicate

[Eleanor Linkkila]

Thanks, yes, I tried that.  I think I have tried it all but apparently something is quite wrong.  

Gary Ferdinand <alaparos at taconic.net> wrote:      Eleanor,
   
  Have you used the "TEST" or "Auto Detect" functions of weatherlink to see if your problem is just a simple matter of the device showing up on a different port number?  With USB ports windows assigns port numbers dynamically, so if you haven't tried that, give it a go.
   
   
   
   
    -----Original Message-----
From: wxqc-bounces at lists.gladstonefamily.net [mailto:wxqc-bounces at lists.gladstonefamily.net]On Behalf Of Eleanor Linkkila
Sent: Wednesday, March 07, 2007 9:30 PM
To: wxqc at lists.gladstonefamily.net
Subject: [wxqc] Unable to communicate


  Hope someone can give me some guidance.  My computer crashed and operating system had to be reinstalled.  I had my weather station stuff on a separate drive and thought it would survive but it wouldn't run.  I removed it and started again and now my vws won't communicate at all.  Checked my port setting and it looks right but it is a ubs so is there anything different about that.  Any ideas as to why it won't communicate?  old driver that might be left in?  order in which I did something.  Had no problems the first time I installed the WeatherLink and then the VWS.  Any advice would be appreciated. 
   
  Thank you.
   


      Eleanor Linkkila
  Hampton, CT 06247
   


_______________________________________________
wxqc mailing list
Post messages to wxqc at lists.gladstonefamily.net
To unsubcribe or change delivery options, please go to:
http://server.gladstonefamily.net/mailman/listinfo/wxqc

The contents of this message are the responsibility of the author.


Eleanor Linkkila
Hampton, CT 06247
 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://server.gladstonefamily.net/pipermail/wxqc/attachments/20070308/3cd12e75/attachment.htm