[wxqc] Unable to communicate

[Gary Ferdinand]

Eleanor,

Have you used the "TEST" or "Auto Detect" functions of weatherlink to see if
your problem is just a simple matter of the device showing up on a different
port number?  With USB ports windows assigns port numbers dynamically, so if
you haven't tried that, give it a go.




  -----Original Message-----
  From: wxqc-bounces at lists.gladstonefamily.net
[mailto:wxqc-bounces at lists.gladstonefamily.net]On Behalf Of Eleanor Linkkila
  Sent: Wednesday, March 07, 2007 9:30 PM
  To: wxqc at lists.gladstonefamily.net
  Subject: [wxqc] Unable to communicate


  Hope someone can give me some guidance.  My computer crashed and operating
system had to be reinstalled.  I had my weather station stuff on a separate
drive and thought it would survive but it wouldn't run.  I removed it and
started again and now my vws won't communicate at all.  Checked my port
setting and it looks right but it is a ubs so is there anything different
about that.  Any ideas as to why it won't communicate?  old driver that
might be left in?  order in which I did something.  Had no problems the
first time I installed the WeatherLink and then the VWS.  Any advice would
be appreciated.

  Thank you.




  Eleanor Linkkila
  Hampton, CT 06247
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://server.gladstonefamily.net/pipermail/wxqc/attachments/20070308/1aefebe4/attachment.htm