[wxqc] Unable to communicate

[Eleanor Linkkila]

No, I'm not.  Wasn't sure if there was something from WeatherLink that needed to run in background so installed that also as I had the first time.  But have not had it open.  Removed it and VWS still won't communicate.   Tries to go to Port I but said it can't communicate.  Any ideas what else that I can check?  Baud rate is right.  It is the usb version.  Rather frustrating.
   
  Thanks, Eleanor, CW7448
   
  

Dave Helms <dshelms at comcast.net> wrote:
  Hi Eleanor,

Are you trying to run both WeatherLink and VWS at the same time? Only 
one application can run at a time as they compete for the COM port. If 
you want to run VWS, you do not need to load the WeatherLink software. 
All you need is the little WeatherLink hardware connector and you are 
toss the WeatherLink CD-ROM. Don't forget to load the latest version of 
VWSAPRS too.

DaveH
CW0351



Eleanor Linkkila wrote:

> Hope someone can give me some guidance. My computer crashed and 
> operating system had to be reinstalled. I had my weather station 
> stuff on a separate drive and thought it would survive but it wouldn't 
> run. I removed it and started again and now my vws won't communicate 
> at all. Checked my port setting and it looks right but it is a ubs so 
> is there anything different about that. Any ideas as to why it won't 
> communicate? old driver that might be left in? order in which I did 
> something. Had no problems the first time I installed the WeatherLink 
> and then the VWS. Any advice would be appreciated. 
> 
> Thank you.
> 
>
>
> Eleanor Linkkila
> Hampton, CT 06247
> 
>
>------------------------------------------------------------------------
>
>_______________________________________________
>wxqc mailing list
>Post messages to wxqc at lists.gladstonefamily.net
>To unsubcribe or change delivery options, please go to:
>http://server.gladstonefamily.net/mailman/listinfo/wxqc
>
>The contents of this message are the responsibility of the author.
>

_______________________________________________
wxqc mailing list
Post messages to wxqc at lists.gladstonefamily.net
To unsubcribe or change delivery options, please go to:
http://server.gladstonefamily.net/mailman/listinfo/wxqc

The contents of this message are the responsibility of the author.



Eleanor Linkkila
Hampton, CT 06247
 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://server.gladstonefamily.net/pipermail/wxqc/attachments/20070308/b82d13c6/attachment.htm