[wxqc] Pros and Cons On OSI WMR-968

[Isaac Kishk (CW6261)]

You might find this revealing as well:
http://www.wunderground.com/cgi-bin/findweather/getForecast?value=KTXROUND14&query=78681

you will notice anything under 40% RH is an OSI, while the others are
Davis.  hmmm!  I'm betting alot of these dont have them fan aspirated, but I
do.. so thats not the problem, seems the sensor itself isnt that great. man
what a POS i have.  I walk outside and break into a sweat after 10 paces.
these OSI ones are definitely off.

yes I know the data in this email is time sensitive,  so heres a snapshot:
http://i130.photobucket.com/albums/p241/ikishk/RoundRockTexas78681ConditionsForeca.jpg
http://i130.photobucket.com/albums/p241/ikishk/RoundRockTexas78681ConditionsFor-2.jpg
http://i130.photobucket.com/albums/p241/ikishk/RoundRockTexas78681ConditionsFor-3.jpg
http://i130.photobucket.com/albums/p241/ikishk/RoundRockTexas78681ConditionsFor-4.jpg
http://i130.photobucket.com/albums/p241/ikishk/RoundRockTexas78681ConditionsFor-5.jpg
http://i130.photobucket.com/albums/p241/ikishk/RoundRockTexas78681ConditionsFor-6.jpg



On 6/11/07, Isaac Kishk (CW6261) <ikishk+wxqc at gmail.com> wrote:
>
> I've had the OSI wmr-968 for over a year now.  My various complaints
> range from idiotic support to insanely stupid engineering.
>
> - The rain bucket doesn't "clear" its last reading for 2 hours after.
> so you could have a rainfall rate of .16in/hr for 2 hrs, while it was
> only a 5min shower. RMA'd... turns out that the way it was designed.
> - the solar panel on my anemometer stopped working, which caused it to
> run on batteries.  I attempted to remove the panel to drain it and
> reseal it, but it was manufactured in such a way that removal is
> impossible w/out destroying.  The leads from the solar panels are
> hotglued on the opposite side of the plastic housing you unscrew.  so
> unscrewing it and slowly pulling it apart pulled the wires. RMA woulda
> taken 6 months. whatever, i attached my own panel.
> - the solar panel on my rain bucket decided to just stop working out
> of the blue. RMA'd.. works fine now.
> - my thermohydrometer started reading 10-15oC extremes out of the
> blue.  turns out it had rust in it from condensation.  RMA'd, bought
> anotehr one in the interim.
> - the main base unit makes a loud "television" type barely audible
> tone when the backlight is on.  Bought a second one for my office,
> same problem.
> - you cant disable the loud beeps on the base unit (unless you cut the
> leads to the speaker).
>
> When dealing with support, they are happy to help, you just have to
> play CSR roulette to find someone who knows what "anemometer" is.
> Once you find them, they will gladly do your RMA.  When you ask for an
> ETA, that's another story.  The products are almost ALWAYS
> backordered.  they use some outfit in china to mass produce them in
> spurts.  instead of stocking a warehouse, they only order enough to
> "cover" the backorders and RMAs.  I ended up ebaying a
> hydrothermometer because they had a 4 month wait on a  new one.
> crazy.
>
> I'm the type that doesn't mind an occasional glitch, but I wish I
> spent the extra money for a real system, not some radio shack "good
> enough" system.  feel free to email me directly if you need more
> details on my setup or any of the situations I described.
>
> On 6/11/07, Rory <amsoiltek at gmail.com> wrote:
> > Hi gang, I'm looking to put up a station and have been comparing both
> the
> > ProVantage and the OSI units.
> > Anyone have any feedback on the WMR-968 I know it's a lot less than the
> > Davis gear and I know you get what you pay for.
> >
> > Thanks for your input.
> >
> >
> > Rory
> >
> >
> > _______________________________________________
> > wxqc mailing list
> > Post messages to wxqc at lists.gladstonefamily.net
> > To unsubcribe or change delivery options, please go to:
> > http://server.gladstonefamily.net/mailman/listinfo/wxqc
> >
> > The contents of this message are the responsibility of the author.
> >
>
>
> --
> www.kishk.org/weather
>



-- 
www.kishk.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://server.gladstonefamily.net/pipermail/wxqc/attachments/20070611/ebbb7446/attachment.htm