[wxqc] Vantage Pro2

[Chris Flory]

Thanks Victor.you answered that quick!

 

I just sent another email.  I did checks as you suggested, and did not see
anything suspect.

 

Regards,

 

-Chris

 

  _____  

From: wxqc-bounces at lists.gladstonefamily.net
[mailto:wxqc-bounces at lists.gladstonefamily.net] On Behalf Of Victor Engel
Sent: Sunday, October 01, 2006 10:17 AM
To: Discussion of weather data quality issues
Subject: Re: [wxqc] Vantage Pro2

 

I have not had this problem, but if I did, the first thing I'd do is go to
the ISS, disconnect all the connectors and reconnect them again. I suspect
the plug to your temp sensor may simply be loose. While disconnected, take a
look to see if any wires are bent or out of alignment. 

On 10/1/06, Chris Flory <cflory at comcast.net> wrote:

I have already engaged Davis support on this, but I was wondering if anyone
else has seen this problem, while I await their feedback.

 

I just bought this VP2 with fan aspirated radiation shield, and it is about
96deg. F outside right now.  The 'temp out' and 'dew point' readouts on the
console are dashed out..it comes and goes, sometimes I see the temp/DP, then
next I see dashes.

 

All other readouts are showing up fine, and I have good communications from
the ISS to the console.

 

Anyone ever have a problem like this?  I have the latest firmware on it.

 

Thanks!

 

-Chris

 


_______________________________________________
wxqc mailing list
Post messages to wxqc at lists.gladstonefamily.net 
To unsubcribe or change delivery options, please go to:
http://server.gladstonefamily.net/mailman/listinfo/wxqc
<http://server.gladstonefamily.net/mailman/listinfo/wxqc> 

The contents of this message are the responsibility of the author.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://server.gladstonefamily.net/pipermail/wxqc/attachments/20061001/e966187f/attachment.html