[wxqc] Vantage Pro2

[Victor Engel]

I have not had this problem, but if I did, the first thing I'd do is go to
the ISS, disconnect all the connectors and reconnect them again. I suspect
the plug to your temp sensor may simply be loose. While disconnected, take a
look to see if any wires are bent or out of alignment.

On 10/1/06, Chris Flory <cflory at comcast.net> wrote:
>
>  I have already engaged Davis support on this, but I was wondering if
> anyone else has seen this problem, while I await their feedback.
>
>
>
> I just bought this VP2 with fan aspirated radiation shield, and it is
> about 96deg. F outside right now.  The 'temp out' and 'dew point' readouts
> on the console are dashed out….it comes and goes, sometimes I see the
> temp/DP, then next I see dashes.
>
>
>
> All other readouts are showing up fine, and I have good communications
> from the ISS to the console.
>
>
>
> Anyone ever have a problem like this?  I have the latest firmware on it.
>
>
>
> Thanks!
>
>
>
> -Chris
>
>
>
> _______________________________________________
> wxqc mailing list
> Post messages to wxqc at lists.gladstonefamily.net
> To unsubcribe or change delivery options, please go to:
> http://server.gladstonefamily.net/mailman/listinfo/wxqc
>
> The contents of this message are the responsibility of the author.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://server.gladstonefamily.net/pipermail/wxqc/attachments/20061001/6080e955/attachment-0001.html