[wxqc] Wind gusts not showing up

[gary.oldham at adelphia.net]

Carol

Looking at your graphs at http://www.findu.com/cgi-bin/wxpage.cgi?call=CW4498!Colorado%20Springs&last=120, it's clear to me that you're either not running WeatherLink 5.6a OR you're running it without either the Bulletin or Summary window open.  Your display and data is completely typical of a WeatherLink station using a version earlier than 5.6.

If you don't have version 5.6a, it's readily available for free download for owners of earlier WeatherLink versions at http://www.davisnet.com/support/weather/software.asp

Gary
CW0146
gary.oldham(at)adelphia.net

---- Carol A Locke <CAL at sysmanint.com> wrote: 

=============
We have had really high wind gusts today and CW4498 (me) are not showing
any.  CW5171 at only .7 miles away is showing very, very high wind gusts.
 
My Weatherlink software is showing 40-45 mph gusts but my weather page is
not.
 
Steve at Findu.com says this:
You are not sending the data, your raw info looks like this

 <http://www.findu.com/cgi-bin/raw.cgi?call=CW4498>
http://www.findu.com/cgi-bin/raw.cgi?call=CW4498

CW4498>APRS,TCPXX*,qAO,T2WXCWOP:@141903z3855.32N/

10452.78W_193/005g...t038P000h20b10170.DsVP

the spaces after the g contain the gust information, but your station 

is sendsing dots, meaning it does not have that info. You'd have to 

ask your software supplier why this is the case. I run Mac and Linux, 

so I've never seen the Davis software and cannot provide support...

 

Any ideas?  I have submitted it to Davis, the maker of my Vantage Pro 2.

 

thank you

 
 
Carol A Locke
SYSTEMS/MANAGEMENT INTEGRATION, INC.
P O Box 50677
Colorado Springs, CO  80949
Tel:  719 599-9197
Fax: 719 599-9198
email: CAL at sysmanint.com