[wxqc] Weatherlink 5.7

[dr. Lee]

This is my current setup.  Please feel free to ask additional questions as
required.
 
N5IHE

-----Original Message-----
From: wxqc-bounces at lists.gladstonefamily.net
[mailto:wxqc-bounces at lists.gladstonefamily.net] On Behalf Of Victor Engel
Sent: Sunday, July 09, 2006 9:12 AM
To: Discussion of weather data quality issues
Subject: Re: [wxqc] Weatherlink 5.7


OK. Thanks. I didn't know if Davis released the port or not. Since I've
already installed VP Live, I'll take some time today to make sure it's set
up properly. I tried it out briefly, and it wasn't updating APRS, so I
figured there was a port contention. Given what you've stated, it's probably
a setup issue. 


On 7/9/06, dr. Lee <drlee6530 at drlee.com> wrote: 

VP Live does not cause com port problems with one port to the console.  You
install the Davis software then install VP Live and configure it so when it
starts up it reads the archive files from the davis and then set the time
between when vp Live releases the port and starts the davis Software to down
load data from the console to the archive.  When the davis software is done
with the download it releases the port as it quits and the VP Live software
again has the port to the console.  So there is ZERO cost with this prodict
runnubg with davis software as the VP Live acts as the controlling and
queing the runnung ov the davis software in the background.
 
N5IHE


-----Original Message-----
From: wxqc-bounces at lists.gladstonefamily.net
[mailto:wxqc-bounces at lists.gladstonefamily.net] On Behalf Of Victor Engel

Sent: Saturday, July 08, 2006 7:50 PM
To: Discussion of weather data quality issues

Subject: Re: [wxqc] Weatherlink 5.7



For me that would not be zero cost, because of com port contention. The com
sharing software only works on Windows 2000 and Windows XP, I think. There
is a commercial product for about $100 that works on other versions of
Windows, but I don't have it yet. 


On 7/8/06, dr. Lee <drlee6530 at drlee.com> wrote: 

The only zero cost solution is to use VP Live with Davis software as
Weatherlink still does not meet the requirements alone but still needs some
help.
 
N5IHE


-----Original Message-----
From: wxqc-bounces at lists.gladstonefamily.net [mailto:
<mailto:wxqc-bounces at lists.gladstonefamily.net>
wxqc-bounces at lists.gladstonefamily.net] On Behalf Of Victor Engel
Sent: Saturday, July 08, 2006 6:39 PM
To: Discussion of weather data quality issues
Subject: [wxqc] Weatherlink 5.7


Weatherlink 5.7 was released a couple of months ago. I just upgraded today
and notice an anomaly with APRS. The wind gust data no longer seems to be
transmitted -- or it is being transmitted as zeroes.

Prior to the upgrade, I had my software set to 1 minute gust/5 minute mean.
I did not change the setting, which no longer seems to be available. The
release notes say the software was changed to send 2 minute gust and 20
minute mean. 

If anyone else is using Weatherlink 5.7 to update APRS data, I'd like to get
some confirmation of this and possibly submit a bug report. Of if there's
something I can do in setup to ensure gust data is nonzero, let me know what
that is. 

Victor



_______________________________________________
wxqc mailing list
wxqc at lists.gladstonefamily.net
http://pond1.gladstonefamily.net:8080/mailman/listinfo/wxqc

The contents of this message are the responsibility of the author. 





_______________________________________________
wxqc mailing list
wxqc at lists.gladstonefamily.net
http://pond1.gladstonefamily.net:8080/mailman/listinfo/wxqc

The contents of this message are the responsibility of the author. 




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://pond1.gladstonefamily.net:8080/pipermail/wxqc/attachments/20060709/8c31c82b/attachment-0001.html