[wxqc] Re: wxqc Digest, Vol 16, Issue 10

[Thomas Barstow]

I got it fixed many thanks to all on the response.


>------------------------------
>
>Message: 2
>Date: Mon, 6 Feb 2006 8:48:16 -0500
>From: gary.oldham at adelphia.net
>Subject: Re: [wxqc] Vantage Pro 2 Time
>To: Discussion of weather data quality issues
>         <wxqc at lists.gladstonefamily.net>
>Cc: Thomas Barstow <tbarstow at earthlink.net>
>Message-ID: <6303819.1139233696084.JavaMail.root at web23>
>Content-Type: text/plain; charset=utf-8
>
>I don't think that VWS lets the computer set the console clock 
>(unlike all the other VP software).  To reset the console clock, 
>hold DONE and the down arrow for a couple of seconds until the 
>console goes into the setup mode.  Then press the right arrow until 
>you get to the clock screen; the hours will be flashing.  Use the up 
>and down arrows to change that; when satisfied, press the right 
>arrow to move to minutes, then use the up and down arrows to 
>adjust.  When done, press DONE (suprise) and hold until you go back 
>to the normal screen.
>
>Don't forget, Davis manuals are online at Davis' site: 
>www.davisnet.com.  Go to Support, then Weather.
>
>Gary
>CW0146
>gary.oldham(at)adelphia.net
>
>---- Thomas Barstow <tbarstow at earthlink.net> wrote:
>
>=============
>I'm trying to adjust the time on my Vantage Pro 2 console but can not
>find the manual.  Can anyone give me the instructions.  I'm using VWS
>software.  There seems to be about 3 mins difference between the VWS
>computer time and Vantage Pro 2 console.
>
>Thanks
>

Tom Barstow